Functional Features
Supports comprehensive detection of solid, liquid, and gas samples with accurate and reliable results.
Color touch – screen, full – digital keyboard, one – key start – up, simple operation.
Intelligent detection function: automatic balance, automatic detection, and automatic adjustment of detection precision in response to environmental changes.
Electrolysis control function: adapts to various electrolytes, with a high detection limit and a moisture – determination precision of up to 0.01ug.
Sample – bottle automatic – puncture lifting function: simple operation, effectively improving work efficiency.
Sample evaporator has multiple high – precision temperature – control modes such as constant temperature and constant rise, and is equipped with intelligent over – temperature protection.
Can edit, store, and call various analysis – method parameters to facilitate adaptation to different sample tests.
Built – in multiple measurement methods, simultaneously adapting to various detection requirements for gases, liquids, fixed samples, and low – water – content samples.
Intelligent status monitoring, hardware intelligent protection, abnormal termination, timing stop, etc., effectively extending product service life.
Technical Parameters
| Power Supply | Single – phase AC220V, Frequency 50Hz, Power approximately 300W |
| Gas Source | Input pressure ≤ 0.6MPa, dry compressed air or dry nitrogen (99.99% purity) |
| Measurement Range | 3ug – 199mg (H₂O mass) |
| Measurement Resolution | 0.01ug (H₂O mass) |
| Measurement Repeatability | > 99.7% (500ug pure water) |
| Sample Measurement Time | Several tens of seconds to several tens of minutes (depending on the sample method) |
| Applicable Sample Types | Liquids, solids, and others |
| Sample Injection Method | Puncture injection, manual eight – position |
| Temperature Control Range | Recommended 40 – 280°C / 0.1°C programmable |
| Heating Rate | 15°C/min (below 200°C) |
| Flow Rate Range | 0 – 100ml/min |
| Sample Bottle Specifications | 10ml and 20ml |
| Data Output | RS232/USB pin – type micro – printer |
| Equipment Size | Approximately L460mm × W240mm × H360mm (subject to the actual product) |