Features
- Supports comprehensive detection of solid, liquid, and gas samples with accurate and reliable results.
- Color touch-screen, full-digital keyboard, one-key start-up, simple operation.
- Intelligent detection function: automatic balance, automatic detection, and automatic adjustment of detection precision in response to environmental changes.
- Electrolysis control function: adapts to various electrolytes, with a high detection limit and a moisture-determination precision of up to 0.01ug.
- Sample-bottle automatic-puncture lifting function: simple operation, effectively improving work efficiency.
- Sample evaporator has multiple high-precision temperature-control modes such as constant temperature and constant rise, and is equipped with intelligent over-temperature protection.
- Can edit, store, and call various analysis-method parameters to facilitate adaptation to different sample tests.
- Built-in multiple measurement methods, simultaneously adapting to various detection requirements for gases, liquids, fixed samples, and low-water-content samples.
- Intelligent status monitoring, hardware intelligent protection, abnormal termination, timing stop, etc., effectively extending product service life.
Specifications
| Power Supply | Single-phase AC220V, frequency 50Hz, power approximately 300W |
| Gas Source | Input pressure ≤ 0.6MPa, dry compressed air or dry nitrogen (99.99% purity) |
| Measurement Range | 3ug – 199mg (H₂O mass) |
| Measurement Resolution | 0.01ug (H₂O mass) |
| Measurement Repeatability | > 99.7% (500ug pure water) |
| Sample Measurement Time | Several tens of seconds to several tens of minutes (depending on the sample method) |
| Applicable Sample Types | Liquids, solids, and others |
| Sample Injection Method | Puncture injection, manual eight-position |
| Temperature Control Range | Recommended 40 – 280℃ / 0.1℃ programmable |
| Heating Rate | 15℃/min (below 200℃) |
| Flow Rate Range | 0 – 100ml/min |
| Sample Bottle Specifications | 10ml and 20ml |
| Data Output | RS232/USB pin-type micro-printer |
| Equipment Size | Approximately L460mm × W240mm × H360mm (subject to the actual product) |
