Functional Features
It realizes the unmanned transfer of materials in each process section, ensuring the consistency of battery core production.
It integrates functions such as CCD detection, Hipot short – circuit detection, internal resistance voltage detection, and airtightness testing to ensure the reliability of battery core production.
It is equipped with a high – efficiency dust removal system to ensure the cleanliness of process sections prone to dust generation such as automatic line cutting and trimming.
The automatic line adopts a laser cutting method to realize low – cost and fast switching of battery core models.
It adopts a fully – sealed structure design, with internal air – intake and exhaust circulation, and is equipped with a dehumidifier unit to achieve an ultra – low – dew – point atmosphere environment.
It is equipped with self – developed scientific – research – level MES host computer software for status monitoring and data collection of all equipment, realizing the traceability of battery core data, process parameters, and environmental parameters through code – spraying and code – reading systems.
It has an integrated line design, small floor space, and low energy consumption.
It has multiple safety protections such as emergency stop design, button protection cover, and safety light curtain to protect the safety of operators..
Technical Parameters
| Power Supply | Three – phase five – wire system AC 380V ± 10%, frequency 50Hz, power 60.8kW |
| Applicable Range | Single – ended tab – out pouch cell, tab length 90 ~ 160mm, tab width 110 ~ 200mm (excluding tab ears for wide – side tab – out), maximum thickness 3 ~ 3mm |
| Production Capacity | Approximately 3 minutes per cell, 200 cells per day (calculated based on 10 – hour workday, 6mm – thick cell, 41 layers of positive and negative electrodes in total) |
| Loading Method | Positive and negative electrodes, positive and negative tabs, aluminum – plastic film, separator, end – tape, high – temperature tape winding material loading |
| Unloading Method | Battery tray |
| Temperature and Humidity | Fully – sealed design, equipped with a dehumidifier to provide a working environment with a temperature of 20 ~ 25°C and a dew – point of – 60°C |
| Equipment Dimensions | Overall dimensions: L16050mm × W1600mm × H2450mm (including top air duct)Installation dimensions: L18500mm × W3500mm × H2700mm |
| Total Weight | Approximately 11.9T |
