Viscometer-MSK-SFM-VSSR

MSK – SFM – VSSR viscometer is a device that can be used to measure the viscosity of small – volume liquids. This viscometer is widely used for viscosity detection and control of fluids such as grease, paint, coating, slurry, textile, food, medicine, adhesive, and cosmetics, and it is the preferred model for testing the viscosity of small – volume samples.

Functional Features

Measurement data is directly displayed on the LCD screen without the need for secondary calculation.
It can measure the viscosity of small – volume liquids (8 – 12 mL).
Temperature probes can be selected to measure the temperature of the sample being tested.
It adopts micro – computer – driven technology and imported stepper motors, with precise and stable rotation speed.
It uses switching power supply technology, with a wide range of voltage and frequency, and fluctuations in power supply will not affect measurement accuracy.
It has the function of timing measurement, which is very useful for detecting non – Newtonian fluids
It has an automatic scanning function, and the instrument can automatically recommend suitable combinations of rotors and rotation speeds.
It can automatically display the maximum viscosity range that can be measured by the selected combination.
It can be connected to a micro – printer to print various data; a printer needs to be selected, and the standard configuration does not include a printer.
When measuring viscosity, the current shear rate and shear stress can be switched and viewed.
When large fluctuations in the detected data are detected, the displayed data will flash to indicate that the data is unstable.

Technical Parameters

Power Supply	Single – phase AC100 – 240V, frequency 50Hz/60Hz, power consumption about 50W
Display Method	Liquid crystal screen
Display Information	Viscosity value, temperature, time, torque, rotation speed, rotor number
Rotation Speed	0.3/0.5/0.6/1.0/1.5/2.0/2.5/3/4/5/6/7/8/9/10/12/14/15/16/18/20/25/30/35/40/45/50/55/60/65/70/75/80/85/90/95/100RPM, a total of 37 – gear rotation speed options are available
Rotor	There are four types of rotors: 18#, 25#, 31#, and 34#
Repeatability Error	±0.5% FS
Test Range	3 – 1,600,000cP
Sample Test Requirement	8 – 12mL (depending on different rotors)
Temperature Probe (optional)	PT100 temperature sensor, temperature measurement range: – 40 – 250°C, error ≤ ±0.2°C
Equipment Size	Approximately L 360mm * W 300mm * H 560mm (subject to the actual object)
Weight	Approximately 4.5KG (subject to the actual object)