Specifications
| Voltage | AC 208~240V, 50/60Hz |
| Power | 330W |
| Press Pressure Capacity | 0 – 50T |
| Cylinder Stroke | Max. 50mm |
| Equal-Diameter Press Mold Volume | 50 I.D. x 150H mm |
| Mold | Pressure gauge display value (MPa) |
| Mold | Actual pressure applied to the mold (Ton): 15 / 30 / 50 |
| Mold | Actual pressure inside the CIP mold (MPa): 76 / 153 / 255 |
| Working Area Dimensions | ● D1: 180mm ● D2: 210mm ● D3: 150mm ● H1: 450mm ● H2: 400mm |
| Dimension | 50 (L) X 420(W) X 1010 (H) mm |
| Weight | 200 Kg |
| Application Precautions | Liquid rubber can be used to coat and seal products, which serves the functions of isolation and protection. |
| Precautions for Use | ● The pressure holding time should generally not exceed 8 minutes. ● The pressure value will drop slightly during pressure holding, which is a normal phenomenon. Do not continue to pressurize during this period. ● Ensure that the pressure is completely released before pressurization. Start pressurizing only after the handwheel and pressure relief valve are tightened. ● Do not exceed the maximum stroke of the hydraulic cylinder (50mm) during pressurization. |
| Certification | CE Certification |
| Warranty | 1 year (Consumables such as sealing rings are not covered by the warranty.) |
Operational Notes & Disclaimer
The product information on this website (including product images, descriptions, technical specifications, etc.) is for reference only. Due to potential delays in updating, the content described may differ from the actual product. Please contact our customer service for confirmation. The information provided on this website does not constitute any offer or commitment. Kejing Company reserves the right to improve and modify any information on this website from time to time without prior notice.
