Planetary Vacuum Centrifugal Mixer MSK-PCV-300 | Shenzhen Kejing Star Technology

Planetary Vacuum Centrifugal Mixer-MSK-PCV-300

Application Scope:

MSK-PCV-300 is a CE-certified planetary vacuum centrifugal mixer for mixing various liquid and powder materials. Sample materials include nano-powders, conductive ceramics, battery powders or slurries, carbon nanotubes, oxide powders, metal powders, etc. This unit is especially suitable for high-viscosity materials. It is equipped with two 300 ml vacuum mixing jars to enable sample mixing under vacuum conditions for superior experimental results.

Model:

MSK-PCV-300

Equipment Dimensions:

Approx. L405 mm × W610 mm × H605 mm (including protruding parts, subject to actual product)

Weight:

Approx. 90 kg (subject to actual product)

Functional Features

Dual-center mixing and defoaming device with dual containers for larger working volume.
Centrifugal force from rotation and convection generated by revolution homogenize sample materials.
Vacuum pressure effectively eliminates sub-micron air bubbles inside materials.
Contact-free design without mixing blades to minimize contamination.
Two operation modes: automatic and manual; 6 sets of programs can be stored under automatic mode.
Safety design with vacuum isolation structure for motor and electrical components.

Specifications

Operating Voltage	Single-phase AC 220V, 50Hz, power approx. 1.35 kW
Mixing Method	Planetary centrifugal vacuum mixing
Standard Container	300 ml ×2 (Φ77×H85 mm)
Max Processing Volume	150 ml ×2
Working Principle	Planetary gravity mixing (Rotation / Revolution = fixed 0.6 ratio) for stirring and defoaming
Revolution	Speed-adjustable (200-2000 rpm); arbitrary input, accuracy: 1 rpm
Rotation	0.6 times of revolution speed
Max Speed	2000 rpm
Vacuum Flow Rate	165 L/min
Vacuum Pressure	-98 kPa, accuracy 0.1 kPa; vacuum delay and vacuum level adjustable freely
Stored Parameter Sets	6 groups
Balance Adjustment	Dual-side counterweight balance adjustment
Setting Time	Three-segment programmable, each segment 200 s, total 600 s (accuracy 1 s). (In Auto mode: to prevent jar over-heating & melting, max 150 s per segment for 1450-1800 rpm; max 50 s per segment above 1800 rpm.) (In Manual mode: for speed＞1800 rpm, single-run max 120 s; auto 120-second cooling countdown upon completion.)
Control System	Dual closed-loop PLC control, Chinese UI, touch-screen operation
Lubrication System	Cup-splash-proof structure, passive lubrication to avoid bearing wear
Main Alarm Functions	Unbalanced condition / Upper cover not closed / Overload
Main Safety Functions	Auto-stop upon fault; upper cover auto-lock during operation
Transmission Type	Gear drive
Equipment Dimensions	Approx. L405 mm × W610 mm × H605 mm (including protruding parts, subject to actual product)
Weight	Approx. 90 kg (subject to actual product)